This Stimulator is for surface stimulation with felts or steel-balls. There is a 30mm distance between the two stimulation points and can be either hand held or fixed with Velcro bands. The stimulator electrode with hand grip is sold in a kit which contains:
• Round felter tips
• Two stainless-steel stimulating electrodes
• A screwdriver to screw the metal electrodes in the stimulator
• Two Velcro straps 40 and 70 cm long
 

Cod. STIM1571
150cm long lead wire and 5-pole DIN45322 connector

Cod. STIM1526
150cm long lead wire and Touch proof connector

Cod. SFERSTIM
stain&steal stimulating electrode to be used with cod. STIMXXXX

Cod. FELT0520
disposable felter to be used cod. STIMXXXX 1 pack 50 pz

Small bipolar shielded bar electrodes.
Recording and stimulating bar electrodes with two 6,5mm x 20mm felts. 25mm distance between the electrodes. The anode is marked to distinguish between plus and minus as well as different and indifferent. All recording electrodes are sold in a kit which contain the stimulator/recorder with Two Velcro strap 40cm and 70cm long.  

Cod. STRCP01571
150cm long lead wire and 5-pole DIN45322 connector

Cod. STRCP01526
150cm long lead wire and Touch proof connector

Cod. FELT0720
disposable felter to be used (cod.STRCPXXXX) 1 pack 50 pz

Large bipolar shielded bar electrodes.
Recording and stimulating bar electrodes with two 6,5mm x 20mm felts. 40mm distance between the electrodes. The anode is marked to distinguish between plus and minus as well as different and indifferent. All recording electrodes are sold in a kit which contain the stimulator/recorder with Two Velcro strap 40cm and 70cm long.  

Cod. STRCG01571
150cm long lead wire and 5-pole DIN45322 connector

Cod. STRCG01526
150cm long lead wire and Touch proof connector

Cod. FELT0720
disposable felter to be used (cod.STRCGXXXX) 1 pack 50 pz

Hand grip bar with 10mm diam. stainless steel disc electrodes.
30mm distance between the electrodes.  

Bar with 10mm diam. stainless steel disc electrodes.
30mm distance between the electrodes.  

Cod. BAIM0026 100cm long lead wire and Touch proof connector

Cod. BAIM0071 100cm long lead wire and 5-pole DIN45322 connector

Cod. BARR0026 100cm long lead wire and Touch proof connector

Cod. BARR0071 100cm long lead wire and 5-pole DIN45322 connector

Cod. STIM0171
100cm long lead wire and 5-pole DIN45322 connector

Cod. STIM0126
100cm long lead wire and Touch proof connector

A pair of conductive, soft, stainless steel tissue ring electrodes made and a clever fastener which don’t permit the electrodes to move during the stimulation.(patent pending)
 

Cod. SRCOLP0126 A pair of conductive rings with 100cm long cable and safety connector Din 42802

Cod. SRCOLP0171 A pair of conductive rings with 100cm long cable and 5-pole DIN 45322 connector

Cod. SRCOLPS126 A pair of small conductive rings with 100cm long cable and safety connector Din 42802

Cod. SRCOLPS171 A pair of small conductive rings with 100cm long cable and 5-pole DIN 45322 connector

Cod. SRRING0126 A pair of stainless steel rings with 100cm long cable and Touch proof connector

Cod. SRRING0171 A pair of stainless steel rings with 100cm long cable and 5-pole DIN45322 connector

Cod. SRRINGS126 A pair of small stainless steel rings with 100cm long cable and Touch proof connector

Cod. SRRINGS171 A pair of small stainless steel rings with 100cm long cable and 5-pole DIN45322 connector

1

2

A

B

C

D

E

F

G

Cod. STIM/REC00

Cod. 100000NH

Cod. 1002SCNHR

Cod. SRSOC0000

Cod. SRDISC0000

Cod. SRCOLP0000

Cod. SRCLIP0000

Cod. SRRING0000

Cod. SRFLAT0000

Cod. SRSTUD0000

Set of reusable stimulating and recording electrodes. The set contains:

Reusable EMG connection shielded cable with 5-pole connector for RECORDING

Reusable EMG connection cable with 2 Touch Proof connector for STIMULATION

A pair of 1mm sockets moulded in a bipolar socket to fit the EMG needle cable

A pair of AgAgCl disc electrodes moulded in a bipolar socket to fit the EMG needle cable

A pair of conductive soft stainless-steel tissue rings moulded in a bipolar socket to fit the EMG needle cable

A pair of insulated alligator clips moulded in a bipolar socket to fit the EMG needle cable

A pair of stainless-steel rings moulded in a bipolar socket to fit the EMG needle cable

A pair of AgAgCl flat electrodes moulded in a bipolar socket to fit the EMG needle cable

A pair of stud adapters moulded in a bipolar socket to fit the EMG needle cable

This special ground electrode is made of a very flexible mesh of AISI 316L stainless-steel with 0 Ohm resistance. We suggest to use this ground electrode DRY.
The connection is made with a snap button and a lead wire is included in the set. Available in three different sizes.
 

Cod. GDRGP02526 2,5x25cm with press-stud connection and connection cable with Touch proof connector

Cod. GDRGP04026 2,5x40cm with press-stud connection and connection cable with Touch proof connector

Cod. GDRGP07026 2,5x70cm with press-stud connection and connection cable with Touch proof connector

The ground electrodes are made with a conductive elastic tissue with around 50 Ohm. It can be used dry. The connection is made with a snap button and a lead wire is included in the set. Available in three different sizes.
 

Cod. GDRG002526 2,5x25cm with press-stud connection and connection cable with Touch proof connector

Cod. GDRG004026 2,5x40cm with press-stud connection and connection cable with Touch proof connector

Cod. GDRG007026 2,5x70cm with press-stud connection and connection cable with Touch proof connector

Cod. DENIG10026
35x45mm disposable ground electrodes with 100cm lead wire and Touch proof connector

Cod. DENIG15026
35x45mm disposable ground electrodes with 150cm lead wire and Touch proof connector

Cod. CDES003545
35x45mm disposable ground electrodes with stud connector

Cod. LEAD1026300
connection cable, 100cm, green colour with Touch proof connector

Cod. LEDCDE0026
new type 360° lope connection cable, 100cm with Touch proof connector